Chlorine Recipe for Nature 2 Systems

1) Add 1 oz. of SPA BRIGHT to remove any iron and calcium

2) After your spa has reached 100°, start checking and adjusting your pH and alkalinity. This can be done with pH Down and pH Up. You may need to be aggressive when lowering pH/Alkalinity. It is not uncommon to go through 1 lb. or more of pH Down - try doses of up to 1/2 cup ever two (2) hours if needed. Once you pH is balanced, move to step 3

3) Install the NATURE 2 cartridge in your filter (ask your salesperson/delivery person for the specific location) and add one tablespoon of SANI SPA (comes in starter kit - also know as CHLORINE POWER or DICHLOR.)

1) Add 1 Tsp. of SANI SPA (comes in starter kit) or CHLORINE POWDER (bigger bottle) or DICHLOR (technical name) after using your spa.

1) Add a squirt of FOAM AWAY to remove foam while you are in the spa. This is just a temporary solution that works only for about an hour. (A more permanent/maintenance solution is FRESHEN or SPA PERFECT.)

1) Add 1 oz. SPA BRIGHT every week to prevent iron and calcium from building up in your plumbing.

2) Add 2 o. of SPA SHOCK (comes in starter kit) or SANI START (bigger bottle) or POTASSIUM PEROXYMONOSULFATE (technical name). This reactivates your chlorine that is already in your spa.

3) Add 1 oz. of FRESHEN / SPA PERFECT every week to prevent oil build up.

4) Check and adjust pH and Alkalinity as needed.

NOTE: Is it NOT necessary to maintain a chlorine reading with the Nature 2 system.

1) Remove and soak your filter cartridges in CARTRIDGE-RENU. Simply follow the direction on the label for mixing/soaking. You can use a bucket of cleaning solution 3 or 4 times, depending on how dirty your filters are.